新闻资讯 NEWS

行业新闻

当前位置: 网站首页 > 新闻资讯 > 行业新闻
  • 道闸厂家的产品介绍
  • 本站编辑:杭州国保科技有限公司发布日期:2019-06-26 16:23 浏览次数:

道闸又称挡车器,是由减速箱、电机、(或者采用液压)传动机构、平衡装置、机箱、闸杆支架、闸杆等部分组成。 道闸分类按照控制部分的性能分为:机电道闸、数字道闸、智能闸,其中智能闸具有LED显示、语音播报功能。

Gate, also known as car stopper, is composed of reducer, motor, (or hydraulic) transmission mechanism, balance device, chassis, brake support, brake rod and other parts. According to the performance of the control part, the classification of gates can be divided into mechanical, digital and intelligent gates, in which the intelligent gates have the functions of LED display and voice broadcast.

根据闸杆分为:栅栏道闸、直杆道闸、曲杆道闸 根据起落速度分为:快速道闸、中速道闸、慢速道闸 根据安装方向分为:左向道闸、右向道闸 确定位置 易显眼处,闸杆面朝外(路口),道闸地面与路面需同一平面、路面需时混泥土地面作为道闸基础。

According to the installation direction, the gate can be divided into three parts: fence gate, straight bar gate and curved bar gate. They are fast gate, medium-speed gate and slow-speed gate. According to the installation direction, they can be divided into left gate and right gate. The gate face is facing out (intersection). The ground of the gate and the road surface need the same plane, and when the road surface needs the concrete surface as the foundation of the gate.

道闸安装方法

Installation Method of Gate

1.取出箱内随机附件。

1. Remove the random accessories from the box.

2.将箱体放置确定位置,打开箱门,用记号笔或螺丝刀在箱底板孔位处划线,并移开箱体。

2. Place the box in a definite position, open the door of the box, mark the hole of the bottom plate with a marking pen or screwdriver, and remove the box.

3.使用冲击钻分别在几号出打上膨胀螺丝钉,孔深70-80mm,并置入膨胀螺丝,调好箱体水平、垂直度、拧紧螺母。

3. Use percussion drill to punch expansion screw on the number of outlets, hole depth 70-80 mm, and insert expansion screw, adjust the box horizontal, vertical and tighten the nut.